Model:
XHL 103 | Use:
This machine can press sublimation, impregnant printing ink color
picture on cotton, hemp, fibre and another fabric by heat press,
can use in technics heat treatment as silk screen painting, tempera
painting and froth printing.and also can print any color mark,
photos or pictures on the ceramic plate or metal plate .It is
particularly suitable for medal, souvenir , tombstone image ,
culture T-shirt and so on. economical and practicably . | | | Characteristic ;
1..digital control system PID Micro-computer controller .high
precision ( 1℃) has mirco-switch knob .
2.. all digital time show , high accuracy .
3.. Heat Tube integrate with Heat Board in one unit , safety,
durable, heat distribute uniformity. and strong heat exchange
4. There is a protecting layer which composed of fluorin and
titanium on heating plate
5. There is a silica gel pad which can withstand 400 centigrade and
doesn’t distortion.
on the motherboard
6..beautiful appearance, small and exquisite ,effective improve
working efficiency . | efficiency： | Voltaga: | 110v | 220v | | | Power: | 1800w | | | | Temperature range: | 0-399℃ | | | | Time range: | 0-99sec | | | | Work table size: | 38*38 | 40*50(mm) | 40*60(mm) | | Casing size: | 72*44*54 | 75*65*42 | | | Avoirdupois: | 29kg | 35kg | |
Operation: 1.Plug the power and turn on the general switch and the indication
light bright. 2..Adjust the temperature regulator to suitable
temperature .when temperature reaches the set point, the indication
light will go out .then can be start to work. 3. Adjust timer
button to a suitable time, 4. Put the clothes on the heating plate,
then cover with the transfer paper on the clothes,( please note the
obverse and reverse of the paper).press the handle down until the
end . 5..The buzzer will alarm when time is over , at this time you
should take the handle up to the original place. Notice: 1.must have a suitable and firm earth wire protection . 2. In
order to avoid handle distortion , please don’t force the handle
more than 30 kg. 3..please note the obverse and reverse of the
paper when cover the heat transfer paper. 4..if want to tear off
the transfer paper in the cold condition , please wipe the paper by
brush first , wait 5-10 second , then tear off the paper 5..if want
to tear off the transfer paper in the hot condition. please tear it
off immediately after printing 6..A suitable time, temperature and
pressure are all important factors to a successful transfer
printing; and the thickness of the clothes, the material and the
kind of the transfer paper can also influence the effect. 7..we are
provide all kind of heat transfer paper 8.Please test for print
before produce as batch Maintenance: 1, Pressure: if the pressure is not enough or too much, you can
loose the pressure screw to adjust it. Please clo |
|
|
